Operating Conditions:
Pumped Liquid: Rainwater, dirty water, and wastewater containing solid materials with a maximum diameter allowed by the impeller (20 mm), free of abrasive substances and non-flammable.
Maximum Liquid Temperature: 35°C
Minimum Pumping Level: 10 cm above the pump body
Maximum Liquid Density: Not greater than 1100 kg/m³
Construction:
Motor Housing and Cover: Stainless steel AISI 304
Impeller and Pump Body: Cast iron G20
Motor Shaft: Stainless steel AISI 416
Mechanical Seal: Silicon carbide / Aluminium
O-Ring: NBR (nitrile rubber)
Electric Motor:
2-pole electric motor in special non-toxic dielectric oil (for better cooling)
Protection: IP68
Insulation Class: F
Voltage: Single-phase 230V, 50Hz with thermal protection or Three-phase 230/400V, 50Hz
The motor is cooled by the same liquid in which the pump is submerged
Power Range: From 0.55 kW to 1.5 kW
Supplied with 10-meter H07 RN-F cable and Schuko plug; three-phase versions are supplied with free cable ends.
